BSA A65 TRIUMPH T120 T140 TSX TSS OIL GAUGE KIT
PLEASE HAVE IN MIND THAT THIS KIT IS FITTABLE ONLY TO MODELS THAT ARE EQUIPPED WITH THE OIL WARNING SWITCH FUNCTION WHICH I BELIEVE IT WAS COMMON TO BSA-TRIUMPH RANGE AFTER 1969.
Description:
-Double scale gauge: 0 to 6 bar or 0 to 85 psi.
-Mounting on handle bar (handle bar diameter 22mm).
-Adapter on engine (banjo connector): it is connected to engine together with the oil
warning switch, thread 25/64” 27TPI. (most commonly known as 1/8" NP thread)
The kit contains
1) One oil gauge of 40mm diameter with handle bar mounting bracket and connector to
4mm oil line.
2) Extra 4mm connector with 90º angle.
3) One and a half meters of plastic oil line of 4mm diameter black color.
4) One meter of rubber line for the protection of the plastic line.
5) Stainless steel connector to engine (banjo connector).
6) Three ertalon washers
7) Stainless steel adaptor (banjo bolt)
8) Polished aluminum connector for the oil warning switch.
9) 5 straps to secure the oil line
10) Fitting instructions
The rubber line (4) can be easily fitted outside of the plastic oil line for extra protection:
A) Against an accidentally contact with the exhaust.
B) More protection in case of jamming with the steering movement.
C) Protection against the small possibility of thrown objects from the front wheel.
I BELIEVE THAT THIS KIT CAN BE FITTED TO ANY BRITISH CLASSIC MOTORCYCLE THAT HAS THE LUCAS OIL WARNING SWITCH BUT I CAN ONLY GUARANTEE FOR THE ABOVE BSA-TRIUMPH MODELS.