Oil pressure gauge kit suitable for Norton Commandos and Atlas models.
Description:
-Double scale gauge: 0 to 6 bar or 0 to 85 psi.
-Mounting on handle bar (handle bar diameter 22mm).
-Adaptor on engine: it is connected to one of the rocker oil feed connections, thread 5/16 BSF 22TPI.
The kit contains
1) One oil gauge of 40mm diameter with handle bar mounting bracket and connector to 4mm oil line.
2) Extra 4mm connector with 90º angle.
3) One and a half meters of plastic oil line of 4mm diameter black color.
4) One meter of rubber line for the protection of the plastic line.
5) Stainless steel connector to engine (banjo connector).
6) Three ertalon washers
7) Stainless steel adaptor (banjo) bolt (according to motorcycle model)
8) 5 tie wraps to secure the oil line
9) Installation instructions
The rubber line (4) can be easily fitted outside of the plastic oil line for extra protection:
A) Against an accidentally contact with the exhaust.
B) More protection in case of jamming with the steering movement.
C) Protection against the small possibility of thrown objects from the front wheel.
It’s a very discreet kit that will not disturb the lines of your classic Norton.